Parts & Costs for a strong 2.5l Rebuild



This list is assuming you already have a good 2.3l Engine Block, a decent
cylinder head, and you reuse your rods. I also did not repalce the timing
chain tensioner rails which would run you another $450 for both.

Parts and Prices

DescriptionPart NumberQuantityCost
EVO 3 Crankshaft11 21 1 316 9781$899.00
ARP Main BoltsN/A10?
J and E Pistons w/Total Seal RingsN/A4$640.00
Machine work on BlockN/A1?
Machine work on RodsN/A4?
Freeze Plugs for Block11 11 1 717 9397$12.60
Bottom End Gasket Set11 11 1 316 9931$55.68
EVO 3 Oil Pump11 41 1 316 8531$163.08
Oil Pump Chain11 41 1 716 9881$9.24
48mm Throttle BodiesN/A1$1670.00
48mm Air HornsN/A1$325.00
Air Horn O-Ring (Large)11 61 1 307 7661$14.58
Machine Work on TBodies and Air HornsN/A1$225.00
EVO Intake GasketsN/A2$135.00
EVO 3 Fuel InjectorsN/A4$375.00
EVO 3 Air Flow MeterN/A2$260.00
Turner Stage 3 Head WorkN/A1$2450.00
Motorsport Valve SpringsN/A16$395.00
Schrick 284/276 Camshafts284/2762$1025.00
Adjustable Cam GearsN/A2$400.00
Cam Gears Lock Plates11 31 1 305 0702$6.96
EVO 3 Cylinder Head Gasket SetN/A1$275.00
Exhaust Header studs11 12 1 312 09616$26.88
2.5L 2 Piece Rally HeaderN/A1$995.00
Cylinder Head Oil Restrictor11 11 1 306 8741$5.58
Water Pump11 51 1 315 2111$112.74
Timing Chain11 31 1 403 0811$75.42
Timing Chain Tensioner11 31 1 307 7821$49.86
Timing Chain Guide (Side)11 31 1 308 4951$13.02
E-Clips07 11 9 932 8322$.04
 
Total: (and counting..)  $11114.68